Application areas Engineering machinery (excavators, loaders) Metallurgical equipment hydraulic system Injection molding machine and hydraulic station Various industrial hydraulic system tanks
ecommended replacement cycle: Operation conditions Recommended replacement cycle General conditions Every 250 hours or once a month Severe dust environment Check/replace every 100~150 hours Basis before replacement If the oil inlet pressure is reduced or the water alarm is triggered, replace immediately 🎯 Alternative brand parts (if not original): Donaldson, Fleetguard (Cummins), Baldwin, SF, HIFI, etc. all have corresponding alternative models When using alternative parts, ensure that: Same size Matched filtration accuracy Good sealing 📌 Notes: Be sure to empty the air in the old filter element during installation (manual exhaust is required for those with a bleed valve); Replace the sealing ring at the same time when replacing the filter element; Using original or high-quality alternative filter elements can avoid early blockage, leakage and other problems; If the equipment is in a humid or low-temperature environment for a long time, a filter element with anti-condensation function should be selected. If you are using this filter, planning to purchase it, or looking for a replacement model, you can also tell me the equipment model or working conditions, and I can help you make an accurate recommendation. What equipment do you plan to use this filter on?
🧪 Technical parameters (example, actual reference to specific product manual): Parameter Description Model KFI 3310 Structure One-piece molded structure Filter material selection PTFE (polytetrafluoroethylene), PES (polyethersulfone), PP (polypropylene), GF (glass fiber), etc. Filter accuracy Commonly 0.1μm, 0.2μm, 0.45μm, 1μm, 5μm, 10μm, etc. Housing material Polypropylene (PP) or stainless steel housing (depending on the purpose) Length specification 10 inches, 20 inches, 30 inches, 40 inches and other standard lengths (3310 usually means 10 inches) Interface type 226, 222, flat, threaded and other interfaces Maximum operating temperature 80~130°C (depending on the filter material) Maximum working pressure 3~6 bar (determined by the housing and filter material) 🧰 Product features: ✅ One-piece molding design No secondary bonding, eliminating potential leakage risks Enhanced structural integrity and pressure resistance ✅ High filtration efficiency Filter material can achieve deep filtration, with a particle capture rate of up to 99.99% ✅ Good chemical compatibility Can handle acid, alkali, high temperature, solvent fluids ✅ Low pressure difference, long service life Optimized filter material pore structure, fast flow rate, small pressure difference ✅ Support online sterilization and CIP cleaning Suitable for food, pharmaceutical and other fields with high hygiene requirements
Basic product information Item Parameter Description Filter element model 17M-01-49670 Product name Hydraulic oil filter / oil filter Brand matching Komatsu (Komatsu) Applicable media Hydraulic oil, lubricating oil Filter accuracy Commonly 10μm or 25μm (depending on the specific specifications) Type of use Built-in filter element, installed in the hydraulic oil tank or oil circui Functions and effects Efficiently filter impurities: filter iron filings, metal powders, rubber particles, sludge and other pollutants in hydraulic oil. Protect the hydraulic system: prevent pollutants from entering the hydraulic pump and control valve, and increase the service life of the hydraulic system. Maintain hydraulic stability: keep the oil circuit unblocked, and ensure that the hydraulic control system is responsive and runs smoothly. Extend the oil change cycle: improve the cleanliness of the hydraulic oil and reduce maintenance costs. Application equipment range Filter element 17M-01-49670 is widely used in Komatsu excavators, loaders, bulldozers and other equipment, such as: Komatsu PC200-8 Komatsu PC220 Komatsu D65/D85 and other models (subject to actual equipment)
✅ High-efficiency filtration: using advanced high-efficiency filter element materials, it can remove tiny impurities and moisture to ensure fuel cleanliness. ✅ Extend engine life: reduce wear and blockage in the fuel system, reduce failure rate and improve engine durability. ✅ Large capacity design: provide longer replacement cycle, reduce maintenance frequency and improve equipment operation efficiency. ✅ Sturdy and durable: metal shell structure, high pressure resistance, vibration resistance, suitable for harsh working conditions. ✅ Easy to install and replace: spin-on design, easy installation and reduced maintenance costs.
Filter impurities in the fuel (such as dust, metal particles, moisture, etc.) to prevent clogging or wear of key components such as injectors and high-pressure pumps. Improve fuel combustion efficiency, reduce emissions, and extend engine life.
1. Product Overview 1P7360 filter element is a high-efficiency filter element used in hydraulic systems or engine lubrication systems, usually produced by Caterpillar (CAT) or compatible replacement. Its main function is to filter impurities and pollutants in oil or fuel to ensure the normal operation of hydraulic systems, engines or other equipment and extend the service life of equipment. 2. Product Features ✅ High-efficiency filtration: using high-quality filter materials to effectively remove tiny particles and keep the system clean ✅ Durable material: using high-strength metal skeleton and high-quality filter paper, pressure-resistant and high-temperature-resistant ✅ Applicable to a variety of fluids: suitable for hydraulic oil, lubricating oil, diesel and other media ✅ Strong compatibility: can be used for Caterpillar and other brand equipment, and some can replace similar filter elements ✅ Extend equipment life: reduce oil pollution and improve the working efficiency of the engine or hydraulic system
✅ Filter contaminants in hydraulic oil - protect the hydraulic system and prevent particles from entering precision parts. ✅ Reduce system wear - reduce the loss of pumps, valves and actuators, and increase equipment life. ✅ Keep hydraulic oil clean - ensure stable operation of the hydraulic system and improve work efficiency. ✅ Prevent hydraulic system failure - filter out metal debris, dust, moisture and oxidation products to reduce the risk of blockage and damage.
✅ High-efficiency filtration: using high-precision filter materials to remove tiny particles and provide clean fluid or air. ✅ Durable structure: using high-quality metal skeleton and durable sealing materials to ensure long life and high pressure bearing capacity. ✅ Low flow resistance: The optimized filtration structure reduces pressure drop and improves system efficiency. ✅ Wide applicability: suitable for filter systems of different brands and can replace other models of filter elements.