China LF17511 oil filter, engine lubrication filter, cartridge oil filter, heavy-duty truck filter, diesel engine filter, high-efficiency oil filter, China oil filter manufacturer, factory direct supply Manufacturer, Supplier, Factory

Key Specifications: Outer Diameter: 94mm Height: 210mm Thread Size: 1"-12UNF Compatible Part Numbers: LF3784 LF16170 LF4054 VG61000070005 W962

Air Intake Filter Elements for Gas Turbines 1. General Information • Description: Air intake filter • Type: TI 10-19SO 852908 • KKS: MBL19CP001

Product parameters Model: FS53031NN Applicable models: Applicable to a variety of diesel engine models, please refer to the product manual or consult the supplier for details. Filtration accuracy: Usually 10 microns or higher, depending on the model. Materials: Filter element: High-efficiency filter paper or synthetic material. Housing: Metal or high-strength plastic. Operating temperature: -40°C to +120°C (depending on the material). Operating pressure: Usually 0.5 to 1.5 bar, please refer to the product manual for details. Interface size: Standard interface size, please refer to the product manual for specific dimensions. Instructions Installation steps: Preparation: Make sure the engine is turned off and cooled, and prepare tools and new filters. Remove the old filter: Use tools to remove the old filter, and pay attention to prevent fuel leakage. Clean the installation position: Clean the filter installation position to ensure that there is no impurity.

LF17511 engine oil filter cartridge is designed to provide efficient filtration for heavy-duty diesel engines. Manufactured with high-quality filter media, it effectively removes contaminants, prolongs engine life, and ensures smooth operation.

The High Flow Filter Cartridge - YTHF162 produced by JinJue features a long lifespan, high flow rate, and high dirt-holding capacity. It is widely used in industries such as pure water, power plants, municipal wastewater, food, and biopharmaceuticals. With broad chemical compatibility and low operational difficulty, it is highly praised in the market.

ecommended replacement cycle: Operation conditions Recommended replacement cycle General conditions Every 250 hours or once a month Severe dust environment Check/replace every 100~150 hours Basis before replacement If the oil inlet pressure is reduced or the water alarm is triggered, replace immediately 🎯 Alternative brand parts (if not original): Donaldson, Fleetguard (Cummins), Baldwin, SF, HIFI, etc. all have corresponding alternative models When using alternative parts, ensure that: Same size Matched filtration accuracy Good sealing 📌 Notes: Be sure to empty the air in the old filter element during installation (manual exhaust is required for those with a bleed valve); Replace the sealing ring at the same time when replacing the filter element; Using original or high-quality alternative filter elements can avoid early blockage, leakage and other problems; If the equipment is in a humid or low-temperature environment for a long time, a filter element with anti-condensation function should be selected. If you are using this filter, planning to purchase it, or looking for a replacement model, you can also tell me the equipment model or working conditions, and I can help you make an accurate recommendation. What equipment do you plan to use this filter on?