Product parameters Model: FS53031NN Applicable models: Applicable to a variety of diesel engine models, please refer to the product manual or consult the supplier for details. Filtration accuracy: Usually 10 microns or higher, depending on the model. Materials: Filter element: High-efficiency filter paper or synthetic material. Housing: Metal or high-strength plastic. Operating temperature: -40°C to +120°C (depending on the material). Operating pressure: Usually 0.5 to 1.5 bar, please refer to the product manual for details. Interface size: Standard interface size, please refer to the product manual for specific dimensions. Instructions Installation steps: Preparation: Make sure the engine is turned off and cooled, and prepare tools and new filters. Remove the old filter: Use tools to remove the old filter, and pay attention to prevent fuel leakage. Clean the installation position: Clean the filter installation position to ensure that there is no impurity.
Install the new filter: Apply a small amount of fuel to the sealing ring of the new filter, install it in the correct direction and tighten it.
Check the sealing: Check the sealing after installation to ensure that there is no leakage.
Maintenance and Replacement:
Regular Inspection: Check the filter status regularly and replace it according to the vehicle manual or usage.
Replacement Cycle: Usually replace it every 10,000 to 20,000 kilometers, depending on the usage environment.
Precautions
Safe Operation: Pay attention to fire prevention during installation and maintenance, and avoid contact of fuel with high temperature or open flame.
Proper Installation: Make sure the filter is installed correctly to avoid leakage or damage.
Use Genuine Products: Use genuine filters to ensure filtering effect and engine protection.
