Flip Filter

55 Views

The Pipe Sanitary Filter features mirror-polished surfaces with inner Ra≤0.6μm and outer Ra≤0.8μm, using materials like SUS304 and SUS316L.

Contact Now

Live Chat

Inquiry Basket

Category: Automatic Or Manual Washable Filter,Cartridge Bag Filter,Cascading Filters,Corrosion Resistant Filter,Gas Filter,Industrial Grade Filter,Membrane Filter,Sanitary Filter

Product descriptions

When dust and other contaminants are too clogged in the Flip Filter element, the flipping mechanism of the filter element will push the filter element out, reverse the filter cartridge and flush the filter element to remove the pollutants, and then push the filter element back to its original position to continue filtering.

What should you pay attention to when using Flip Filter?

1. Make sure the filter element is clean
2. Clean the filter element regularly
3. Keep your equipment clean
4. Set the filter pressure reasonably
5. Replace the filter element at the appropriate time

When using a flip-type filter, Jinjue engineers remind you that you must pay attention to the cleaning of the equipment, the cleaning and replacement of the filter element, etc. Following the correct operating procedures can ensure the filtration efficiency, service life and safety of the equipment.

Polishing parameters of Pipe Sanitary Filter

Internal and external surface treatment	Polished
Polishing type	Mirror polished
Polishing accuracy	inner surface Ra≤0.6μm, outer surface Ra≤0.8μm

Material of Pipe Sanitary Filter

Filter housing	SUS304, SUS316L
Exhaust&Discharge&Pressure Gauge	SUS304, SUS316L
Quick installation bolt group	SUS304
Support	SUS304
Gaskets	silicone, fluororubber, EPDM, PTFE, fluorine coated

Operating Conditions of Pipe Sanitary Filter

Design pressure	Working temperature	Sterilization
≤ 0.6Mpa	≤80 ℃	online or sterilization cabinet 121C/30min

Connection Form of Pipe Sanitary Filter

Barrel connection	Quick installation bolt group
Import and export	flange/quick release chuck
Exhaust valve	flange/quick release chuck
Drainage valve	flange/quick release chuck
Pressure gauge	quick fit chuck/thread

Selection Table of Pipe Sanitary Filter

Number of filter elements	length of filter element	inlet and outlet connection method	inlet and outlet size	filter material	filter element interface type	sealing ring
01	10	Flange F/chuck K	32	SUS304（T）	222(2)	Silicone (S)
				SUS316L(S)	226(6)	Fluorine glue (V)
					215（5）	EPDM (E)
					M30(M30)	Nitrile (D)