China Key Specifications: Manufacturer, Supplier, Factory

Spray (PTFE/Hara) Filter is a filter made of spray polytetrafluoroethylene (PTFE) and cellulose fiber (Hara), which is usually used for filtering various high-viscosity and highly corrosive liquids. It is a fabric filter element, and its sprayed PTFE material can provide excellent corrosion resistance and high temperature resistance, while Hara gives this filter better filtering effect and mechanical strength.

JinJue Panel Type Chemical Air Filters is designed for removing odors same as others chemical air filters. Much lower initial pressure drop comes from special design --- honeycomb activate carbon combines with synthetic fibre. Activate carbon can adsorb odors, meanwhile synthetic fibre can filter particles upto 10 micron.

High quality Sintered mesh filter element Sintered mesh filter element is made of multiple layers of metal wire mesh which are stacked and sintered in vacuum. The filter element made of it has the characteristics of strong corrosion resistance, good permeability, high strength, easy cleaning and backwashing, precise filtering accuracy, hygienic and clean filter material, and the wire mesh does not fall off.

Product Specifications: Model Number: 19728 Type: Flue Gas Filter / Exhaust Filter Material: Heat-resistant stainless steel or alloy mesh, with optional ceramic fiber layers for high-temperature filtration Filtration Efficiency: Removes up to 99% of fine particles, including soot and ash Temperature Resistance: Up to 800°C (1472°F) Pressure Drop: Low-pressure drop design for efficient gas flow Dimensions: Customizable based on flue or exhaust system requirements

Product parameters Outer diameter (OD): 280 mm Inner diameter (ID): 154 mm Length (Length): 510 mm Weight: about 4 kg Applicable engine: Cummins series Applicable equipment: Commercial vehicles and construction machinery of brands such as Dongfeng Instructions for use Pre-installation inspection: Make sure the filter element is intact, without damage or deformation. Turn off the engine: Before replacing or installing the filter element, make sure the engine is turned off and cooled. Remove the old filter element: Open the air filter housing and remove the old filter element. Clean the housing: Use a clean cloth or compressed air to clean the inside of the filter housing to remove dust and impurities. Install new filter: Place the new KW2851 filter into the housing, ensuring a good seal and no looseness. Close the housing: Re-cover and secure the air filter housing to ensure no air leaks. Regular inspection: It is recommended to regularly inspect and replace the filter every 10,000 to 15,000 kilometers or according to the use environment. Product use Commercial vehicles: such as trucks and buses, to ensure efficient operation of the engine. Construction machinery: such as excavators and loaders, to protect the engine from dust. Power generation equipment: used for diesel generator sets to provide clean air and extend the life of the equipment.

The DLX series of built-in, disposable capsule filters are cost-effective medium- and small-volume filters. Whether your application is for sterilization, particle control, ventilation, or prefiltration, our capsule filters can meet your needs.