China Large capacity design: Suitable for heavy-duty diesel engines, trucks, construction machinery and other equipment. Manufacturer, Supplier, Factory

Jinjue Glass Fibre Cartridge Filter are made using fiberglass technology, offering excellent corrosion resistance and strength. They also feature high filtration efficiency and are not easily damaged. These cartridges are primarily used for liquid and gas filtration in the food, pharmaceutical, chemical, electronics, and environmental industries, as well as in the field of water purification.

The Stainless Steel Mesh Sintered Filter Cartridge is an advanced filter that adopts a high permeability porous structure made of multi-layer stainless steel mesh pressure, forming a sturdy and durable filter to meet the needs of various liquid and gas filtration. Stainless steel mesh sintered filters are commonly used to filter fine particulate matter in liquids or gases under high temperature, high pressure, and harsh chemical environments.

Porous Metal Membrane Filter Element is an advanced microfiltration technology, usually composed of multi-layer metal mesh and ultra-thin stainless steel membrane. This type of filter can filter out very small particles while also having high flow rate and high permeability. Due to its unique porous metal design, this filter has very durable performance and can work stably for a long time.

PTFE Lined Filter refers to a filter that uses polytetrafluoroethylene (PTFE) material to cover or line the filter element. PTFE material is a synthetic material with excellent corrosion resistance, corrosion resistance, high temperature resistance (normally up to 260°C) and excellent mechanical properties. It has a smooth surface, low viscosity, long life, and is non-toxic and odorless.

Medium-efficiency bag filter Medium-efficiency bag filters serve as the core intermediate hub in the three-stage air purification system. Specifically designed to capture suspended dust particles of 1-5μm, they undertake two crucial missions: first, providing pre-protection for end-stage high-efficiency filters (HEPA/ULPA) to significantly reduce their dust load and extend service life; second, directly purifying air with high dust concentration, and can be used as terminal filtration equipment in scenarios with moderate cleanliness requirements. Their bag-type structure is widely recognized as the optimal design in the medium-efficiency filtration field. With the characteristics of high dust-holding capacity and low resistance, they are extensively compatible with commercial and industrial purification systems.

Product parameters Outer diameter (OD): 280 mm Inner diameter (ID): 154 mm Length (Length): 510 mm Weight: about 4 kg Applicable engine: Cummins series Applicable equipment: Commercial vehicles and construction machinery of brands such as Dongfeng Instructions for use Pre-installation inspection: Make sure the filter element is intact, without damage or deformation. Turn off the engine: Before replacing or installing the filter element, make sure the engine is turned off and cooled. Remove the old filter element: Open the air filter housing and remove the old filter element. Clean the housing: Use a clean cloth or compressed air to clean the inside of the filter housing to remove dust and impurities. Install new filter: Place the new KW2851 filter into the housing, ensuring a good seal and no looseness. Close the housing: Re-cover and secure the air filter housing to ensure no air leaks. Regular inspection: It is recommended to regularly inspect and replace the filter every 10,000 to 15,000 kilometers or according to the use environment. Product use Commercial vehicles: such as trucks and buses, to ensure efficient operation of the engine. Construction machinery: such as excavators and loaders, to protect the engine from dust. Power generation equipment: used for diesel generator sets to provide clean air and extend the life of the equipment.