ecommended replacement cycle: Operation conditions Recommended replacement cycle General conditions Every 250 hours or once a month Severe dust environment Check/replace every 100~150 hours Basis before replacement If the oil inlet pressure is reduced or the water alarm is triggered, replace immediately 🎯 Alternative brand parts (if not original): Donaldson, Fleetguard (Cummins), Baldwin, SF, HIFI, etc. all have corresponding alternative models When using alternative parts, ensure that: Same size Matched filtration accuracy Good sealing 📌 Notes: Be sure to empty the air in the old filter element during installation (manual exhaust is required for those with a bleed valve); Replace the sealing ring at the same time when replacing the filter element; Using original or high-quality alternative filter elements can avoid early blockage, leakage and other problems; If the equipment is in a humid or low-temperature environment for a long time, a filter element with anti-condensation function should be selected. If you are using this filter, planning to purchase it, or looking for a replacement model, you can also tell me the equipment model or working conditions, and I can help you make an accurate recommendation. What equipment do you plan to use this filter on?
Efficiently intercept rust, sludge, particles and moisture in fuel
Protect the injection system and prevent the injector from clogging
Improve engine combustion efficiency
Reduce maintenance frequency and extend engine life
🏗️ Applicable equipment (some examples):
Equipment type Possible compatible models (partial)
Bulldozers CAT D6, D7, D8 series, etc.
Excavators CAT 320, 330, etc. series
Loaders CAT 950, 966 series
Generators CAT Genset diesel generator system
Others Some industrial power diesel engines
⚠️ Note: For specific compatible models, please check the user manual of the equipment or confirm with the supplier.
