China  Filtration Accuracy: Up to 98.7% (according to ISO 4548-12 test standard) Manufacturer, Supplier, Factory

This metal microporous filter material is made from irregular stainless steel powder and can be formed by isostatic pressing, molding, or extrusion. It offers excellent permeability and high filtration accuracy, along with sufficient strength and toughness, and can operate at temperatures up to 300°C.

Jinjue Panel Coarse Filters, which are also known as pre-filters, form an essential part of the air filtration system. They are specifically designed to protect the medium and fine filters that follow them in the filtration process. Regular replacement or washing of these pre-filters is recommended every 3-4 weeks to maintain optimal air quality and filtration efficiency.

T-wire filter element, also known as Johnson filter element, fully automatic self-cleaning filter element; is made by welding ribs and V-shaped wire on professional special welding equipment. The ribs and V-shaped wire are resistance welded by special equipment. It has high welding strength, uniform gap, strong corrosion resistance, large effective filtration area, good permeability, simple structure, and the gap can reach 20 microns, which can be selected by the user at will.

JinJue Mini-Pleat PTFE Panel Filters and PTFE ULPA filters are ideal for low noise area, corrosive gas area (especially for hydrofluoric acid) and high clean level area. PTFE membrane as young filter media in China market. Mini-Pleat PTFE Panel Filters are used in HEPA filters and ULPA air filters with stable performance and lower energy consumption. Really suitable for hospitals, sanatoriums, schools and kindergarten, microelectronics industry, sterile room, laboratory etc.

Spray (PTFE/Hara) Filter is a filter made of spray polytetrafluoroethylene (PTFE) and cellulose fiber (Hara), which is usually used for filtering various high-viscosity and highly corrosive liquids. It is a fabric filter element, and its sprayed PTFE material can provide excellent corrosion resistance and high temperature resistance, while Hara gives this filter better filtering effect and mechanical strength.

ecommended replacement cycle: Operation conditions Recommended replacement cycle General conditions Every 250 hours or once a month Severe dust environment Check/replace every 100~150 hours Basis before replacement If the oil inlet pressure is reduced or the water alarm is triggered, replace immediately 🎯 Alternative brand parts (if not original): Donaldson, Fleetguard (Cummins), Baldwin, SF, HIFI, etc. all have corresponding alternative models When using alternative parts, ensure that: Same size Matched filtration accuracy Good sealing 📌 Notes: Be sure to empty the air in the old filter element during installation (manual exhaust is required for those with a bleed valve); Replace the sealing ring at the same time when replacing the filter element; Using original or high-quality alternative filter elements can avoid early blockage, leakage and other problems; If the equipment is in a humid or low-temperature environment for a long time, a filter element with anti-condensation function should be selected. If you are using this filter, planning to purchase it, or looking for a replacement model, you can also tell me the equipment model or working conditions, and I can help you make an accurate recommendation. What equipment do you plan to use this filter on?