ecommended replacement cycle: Operation conditions Recommended replacement cycle General conditions Every 250 hours or once a month Severe dust environment Check/replace every 100~150 hours Basis before replacement If the oil inlet pressure is reduced or the water alarm is triggered, replace immediately 🎯 Alternative brand parts (if not original): Donaldson, Fleetguard (Cummins), Baldwin, SF, HIFI, etc. all have corresponding alternative models When using alternative parts, ensure that: Same size Matched filtration accuracy Good sealing 📌 Notes: Be sure to empty the air in the old filter element during installation (manual exhaust is required for those with a bleed valve); Replace the sealing ring at the same time when replacing the filter element; Using original or high-quality alternative filter elements can avoid early blockage, leakage and other problems; If the equipment is in a humid or low-temperature environment for a long time, a filter element with anti-condensation function should be selected. If you are using this filter, planning to purchase it, or looking for a replacement model, you can also tell me the equipment model or working conditions, and I can help you make an accurate recommendation. What equipment do you plan to use this filter on?
Basic product information Item Parameter Description Filter element model 17M-01-49670 Product name Hydraulic oil filter / oil filter Brand matching Komatsu (Komatsu) Applicable media Hydraulic oil, lubricating oil Filter accuracy Commonly 10μm or 25μm (depending on the specific specifications) Type of use Built-in filter element, installed in the hydraulic oil tank or oil circui Functions and effects Efficiently filter impurities: filter iron filings, metal powders, rubber particles, sludge and other pollutants in hydraulic oil. Protect the hydraulic system: prevent pollutants from entering the hydraulic pump and control valve, and increase the service life of the hydraulic system. Maintain hydraulic stability: keep the oil circuit unblocked, and ensure that the hydraulic control system is responsive and runs smoothly. Extend the oil change cycle: improve the cleanliness of the hydraulic oil and reduce maintenance costs. Application equipment range Filter element 17M-01-49670 is widely used in Komatsu excavators, loaders, bulldozers and other equipment, such as: Komatsu PC200-8 Komatsu PC220 Komatsu D65/D85 and other models (subject to actual equipment)
✅ High-efficiency filtration: using advanced high-efficiency filter element materials, it can remove tiny impurities and moisture to ensure fuel cleanliness. ✅ Extend engine life: reduce wear and blockage in the fuel system, reduce failure rate and improve engine durability. ✅ Large capacity design: provide longer replacement cycle, reduce maintenance frequency and improve equipment operation efficiency. ✅ Sturdy and durable: metal shell structure, high pressure resistance, vibration resistance, suitable for harsh working conditions. ✅ Easy to install and replace: spin-on design, easy installation and reduced maintenance costs.
Filter impurities in the fuel (such as dust, metal particles, moisture, etc.) to prevent clogging or wear of key components such as injectors and high-pressure pumps. Improve fuel combustion efficiency, reduce emissions, and extend engine life.
1105010D354 may be suitable for equipment such as trucks, buses, construction machinery, generator sets, etc. If you need to confirm its specific application, please refer to the manual of the equipment manufacturer or the product description provided by the supplier.
🔹 Applicable vehicle brands (some examples) FILTER HU 816 X is suitable for a variety of models, especially BMW and some Mini, Land Rover, Rolls-Royce models. The specific adaptation is as follows (it is recommended to confirm according to the vehicle VIN code or original part number): BMW 1 Series, 3 Series, 5 Series, X1, X3, X5, X6 and other models Mini Cooper some models Land Rover, Rolls-Royce some models 👉 Replaceable original factory number (OEM):
📏 Product specifications Filter material: high-efficiency synthetic fiber Filter accuracy: 5-10 microns Rated flow: Depending on the model, the flow range adapts to the needs of the fuel system Service life: It is recommended to replace once every 10,000-20,000 kilometers (depending on the fuel quality and vehicle condition) 🔄 Installation and maintenance Pre-installation inspection: Make sure the new filter is intact and matches the size of the old filter. Replacement steps: Replace according to the vehicle manual or maintenance manual to prevent air from entering the fuel line. Replacement cycle: It is recommended to replace it every 10,000-20,000 kilometers or every 1-2 years, depending on the usage. ✅ Summary 0450906458 The fuel filter is a high-quality, durable, and excellent filtering product. It is widely used in European and American brand cars. It can effectively improve the cleanliness of the fuel system and ensure the efficient operation of the engine. 🚗
1. Product name: D6360525 filter 2. Brand/scope of application: This filter is usually used in the hydraulic or fuel filtration system of industrial equipment, construction machinery or heavy diesel engines. 3. Main functions: Filter impurities, metal particles, dust and other pollutants in the oil Protect the engine or hydraulic system and extend the service life of the equipment Improve the cleanliness of fuel or hydraulic oil to ensure the normal operation of the system
