China FS53015 fuel filter product introduction Manufacturer, Supplier, Factory

Inner Side Frame Zero Difference on size Inner Frame High compressive strength Filter Materials Special Filter Materials ,working life 4000-6000hours Customerized Filter Materials We accept Customerized Filter Materials if your quantity is large Air compressor working structure Air compressor air purification equipment is vital for the removal of system contamination Air purification equipment is to remove air dash to keep compressor air clearance. Tiny dust is absorbed into filter paper.More deepness the fold is, the longer working life the filter is .Filter paper is with high efficiency ,large filtration area , low resistance and heavy dust-holding capacity, it can be used in ambient temperature, common temperature, little of acid, alkali and organic solvents

🧪 Technical parameters (example, actual reference to specific product manual): Parameter Description Model KFI 3310 Structure One-piece molded structure Filter material selection PTFE (polytetrafluoroethylene), PES (polyethersulfone), PP (polypropylene), GF (glass fiber), etc. Filter accuracy Commonly 0.1μm, 0.2μm, 0.45μm, 1μm, 5μm, 10μm, etc. Housing material Polypropylene (PP) or stainless steel housing (depending on the purpose) Length specification 10 inches, 20 inches, 30 inches, 40 inches and other standard lengths (3310 usually means 10 inches) Interface type 226, 222, flat, threaded and other interfaces Maximum operating temperature 80~130°C (depending on the filter material) Maximum working pressure 3~6 bar (determined by the housing and filter material) 🧰 Product features: ✅ One-piece molding design No secondary bonding, eliminating potential leakage risks Enhanced structural integrity and pressure resistance ✅ High filtration efficiency Filter material can achieve deep filtration, with a particle capture rate of up to 99.99% ✅ Good chemical compatibility Can handle acid, alkali, high temperature, solvent fluids ✅ Low pressure difference, long service life Optimized filter material pore structure, fast flow rate, small pressure difference ✅ Support online sterilization and CIP cleaning Suitable for food, pharmaceutical and other fields with high hygiene requirements

Ordinary Type Cascade Filter is an electronic filter commonly used in signal processing. It consists of multiple single-stage filters connected together to form a cascade filter structure. A single-stage filter is a circuit that filters the input signal. It allows signals of a specific frequency to pass through, while filtering out signals of other frequencies. Cascading multiple single-stage filters can achieve a higher filtering effect and can achieve more stringent signal screening.

Backwash Filter is a filter with a backwashable filter element. It usually consists of one or more filter elements that can be cleaned and restored by reverse flow. During normal operation, liquid passes through the filter element and intercepts particles, dirt or other impurities in it. When the pressure drop on the surface of the filter element increases, the system will start the backwash operation, and the reverse flow water will flow through the filter element, thereby cleaning and restoring the dirt in it and restoring the cleanliness of the filter element.

JINJUE High Flow Filter Cartridge - YTHF features a large filtration area, high strength, dimensional stability, and low risk of leakage. With its high contaminant holding capacity, the cartridge extends service life. It is primarily suited for industrial applications.

Also known as sintered metal candle filter or metal candle filter element, this filter is made from high-quality sintered metal mesh. The sintered metal mesh consists of five layers: a protective layer, a precision control layer, a diffusion layer, and two reinforcement layers. Compared to porous candle filters, sintered candle filters offer a larger filtration area and higher filtration precision.