China Ulpa Filters Manufacturer, Supplier, Factory

Filtration accuracy: such as 5μm, 10μm, 20μm levels, which determine how small particles can be filtered out. Flow rate: suitable for how much flow of oil or air to pass through. Material: may use paper, synthetic fiber, stainless steel mesh and other materials, affecting the filtration efficiency and life. Replacement cycle: depending on the use, it is generally recommended to replace it every 5000-10000 kilometers (if it is a car filter).

Ordinary Type Cascade Filter is an electronic filter commonly used in signal processing. It consists of multiple single-stage filters connected together to form a cascade filter structure. A single-stage filter is a circuit that filters the input signal. It allows signals of a specific frequency to pass through, while filtering out signals of other frequencies. Cascading multiple single-stage filters can achieve a higher filtering effect and can achieve more stringent signal screening.

A single core gas filter is a gas filter that usually consists of a central core and a filter material wrapped around the central core. Its main function is to filter impurities, particles, microorganisms and other pollutants in the gas to ensure the cleanliness and health safety of the gas.

🔹 Scope of application 📌 Applicable to automobile air conditioning systems of specific brands and models (please refer to official information for specific compatible models). 📌 Suitable for vehicles in different air conditions such as cities, suburbs, and highly polluted environments.

🧪 Technical parameters (example, actual reference to specific product manual): Parameter Description Model KFI 3310 Structure One-piece molded structure Filter material selection PTFE (polytetrafluoroethylene), PES (polyethersulfone), PP (polypropylene), GF (glass fiber), etc. Filter accuracy Commonly 0.1μm, 0.2μm, 0.45μm, 1μm, 5μm, 10μm, etc. Housing material Polypropylene (PP) or stainless steel housing (depending on the purpose) Length specification 10 inches, 20 inches, 30 inches, 40 inches and other standard lengths (3310 usually means 10 inches) Interface type 226, 222, flat, threaded and other interfaces Maximum operating temperature 80~130°C (depending on the filter material) Maximum working pressure 3~6 bar (determined by the housing and filter material) 🧰 Product features: ✅ One-piece molding design No secondary bonding, eliminating potential leakage risks Enhanced structural integrity and pressure resistance ✅ High filtration efficiency Filter material can achieve deep filtration, with a particle capture rate of up to 99.99% ✅ Good chemical compatibility Can handle acid, alkali, high temperature, solvent fluids ✅ Low pressure difference, long service life Optimized filter material pore structure, fast flow rate, small pressure difference ✅ Support online sterilization and CIP cleaning Suitable for food, pharmaceutical and other fields with high hygiene requirements

Jinjuefilter’s HEPA HVAC Filters-Pleated Filters use advanced microfiber media and multi-layer filtration technology, ensuring 99.97% efficiency in capturing particles as small as 0.3 microns. These filters are produced using state-of-the-art automated production lines and undergo rigorous quality control to meet stringent ISO and ASHRAE standards.