China Hepa Filter Ventilation System Manufacturer, Supplier, Factory

JinJue Mini-Pleat PTFE Panel Filters and PTFE ULPA filters are ideal for low noise area, corrosive gas area (especially for hydrofluoric acid) and high clean level area. PTFE membrane as young filter media in China market. Mini-Pleat PTFE Panel Filters are used in HEPA filters and ULPA air filters with stable performance and lower energy consumption. Really suitable for hospitals, sanatoriums, schools and kindergarten, microelectronics industry, sterile room, laboratory etc.

🔹 Applicable fields 🏭 Industrial water treatment: Used to remove impurities in water and improve water purity. 🏠 Home water purification: Suitable for pre-filtration of home water purifiers and central water purification systems. 🍴 Food and beverage: Used for pre-filtration of products such as pure water, juice, and beverages. 💊 Medicine and laboratory: Used for pharmaceutical water and laboratory ultrapure water systems. 🚰 Reverse osmosis (RO) pretreatment: Protect RO membranes and extend system life. 🔹 Installation and maintenance Compatibility: Suitable for standard 10-inch, 20-inch, 30-inch, and 40-inch filter housings. Replacement cycle: Replace every 3-6 months according to water quality and usage to ensure the best filtering effect. Installation steps: Turn off the water source and open the filter housing. Remove the old filter element and clean the inside of the housing. Insert the new filter element and ensure a good seal. Reinstall the housing and turn on the water source to check for leaks. 🔹 Summary This polypropylene filter has the characteristics of high-efficiency filtration, durability and stability, and chemical corrosion resistance. It is suitable for many fields such as industry, home, food, pharmaceuticals, and laboratories. It is an ideal choice for water purification. Its 1 micron filtration accuracy can effectively remove suspended matter and colloidal particles to ensure clean water quality.

Stainless copper fiber sintered felt is made from extremely fine stainless steel fibers (diameter accurate to microns) through a non-woven process, stacked, and then sintered at high temperatures. The finished felt features layers of varying pore sizes, creating a pore gradient that can be controlled to achieve extremely high filtration accuracy and a greater dirt holding capacity.

Spray (PTFE/Hara) Filter is a filter made of spray polytetrafluoroethylene (PTFE) and cellulose fiber (Hara), which is usually used for filtering various high-viscosity and highly corrosive liquids. It is a fabric filter element, and its sprayed PTFE material can provide excellent corrosion resistance and high temperature resistance, while Hara gives this filter better filtering effect and mechanical strength.

The G4 pleated panel filter is specifically designed for HVAC applications, spray booths, and other first-stage filtration needs. It is made from moisture-resistant cardboard and high-quality synthetic fiber pleats with aluminum backing. These filters are incinerable and non-regenerative. They are reinforced for enhanced strength and fit seamlessly into various housings.

High-performance chemical air filter using activated carbon fiber to remove particles and odors from the air. Ideal for VOC control in industrial and commercial applications.