China Separator HEPA Filters Manufacturer, Supplier, Factory

The main filter material of the ballast water filter element is made of three layers of pleated stainless steel woven mesh of varying mesh sizes. The stainless steel woven mesh is woven from stainless steel. The pleated filter element features smooth pores, easy cleaning, high-temperature and corrosion resistance, no mesh shedding, and a long filtration cycle.

Typical application areas: Pre-filtration of pure water equipment Filtration of beverages, alcohol, and edible oil Filtration of water for the pharmaceutical industry Filtration of oil products and chemical solutions Purification of industrial fluids such as electroplating solutions and developer solutions

The JinJue Nylon Filter Cartaidge is comprised of a nylon microporous membrane folded between non-woven fabric or (wire mesh) inner and outer support layers. The cartridge housing, center rod, and end caps are all made of polypropylene material. The overall sealing of the filter cartridge is achieved through thermal fusion welding technology, ensuring complete sealing performance without any adhesives and leakage.

PTFE Lined Filter refers to a filter that uses polytetrafluoroethylene (PTFE) material to cover or line the filter element. PTFE material is a synthetic material with excellent corrosion resistance, corrosion resistance, high temperature resistance (normally up to 260°C) and excellent mechanical properties. It has a smooth surface, low viscosity, long life, and is non-toxic and odorless.

Jinjue Panel Coarse Filters, which are also known as pre-filters, form an essential part of the air filtration system. They are specifically designed to protect the medium and fine filters that follow them in the filtration process. Regular replacement or washing of these pre-filters is recommended every 3-4 weeks to maintain optimal air quality and filtration efficiency.

🧪 Technical parameters (example, actual reference to specific product manual): Parameter Description Model KFI 3310 Structure One-piece molded structure Filter material selection PTFE (polytetrafluoroethylene), PES (polyethersulfone), PP (polypropylene), GF (glass fiber), etc. Filter accuracy Commonly 0.1μm, 0.2μm, 0.45μm, 1μm, 5μm, 10μm, etc. Housing material Polypropylene (PP) or stainless steel housing (depending on the purpose) Length specification 10 inches, 20 inches, 30 inches, 40 inches and other standard lengths (3310 usually means 10 inches) Interface type 226, 222, flat, threaded and other interfaces Maximum operating temperature 80~130°C (depending on the filter material) Maximum working pressure 3~6 bar (determined by the housing and filter material) 🧰 Product features: ✅ One-piece molding design No secondary bonding, eliminating potential leakage risks Enhanced structural integrity and pressure resistance ✅ High filtration efficiency Filter material can achieve deep filtration, with a particle capture rate of up to 99.99% ✅ Good chemical compatibility Can handle acid, alkali, high temperature, solvent fluids ✅ Low pressure difference, long service life Optimized filter material pore structure, fast flow rate, small pressure difference ✅ Support online sterilization and CIP cleaning Suitable for food, pharmaceutical and other fields with high hygiene requirements